Electro-Hydraulic Winches
ODIM Brooke Ocean offers a line of Hydraulic Instrument Winches. These range in size from 2 to 5 HP. All of our hydraulic winches offer the following features:
- Separate winch and HPU units allows HPU to be used for other purposes, if required
- Variable speed control
- Focal Model 180 slip rings
- Powder-coated finish
- Stainless steel fasteners
- Accept steel, stainless steel and synthetic fibre mechanical and E-M cable types
- Fully factory tested and ready to run
Model SP-W-2HP-1 (2 HP Freewheel Winch)
WINCH
 Drum Capacity: |
1000m (3280 ft) of 5mm (0.20") cable | |
| Line Pull: |
Full Drum Bare Drum |
- 68 kg (150 lb) - 93 kg (205 lb) |
| Line Speed: |
Full Drum Bare Drum |
- 0.81 m/s (161 ft/min) - 1.2 m/s (241 ft/min) |
MISCELLANEOUS
- 2 HP, 230 VAC-60-1P HPU
- Oil/water oil cooler
- Freewheel capability
- Aluminum construction
Model SP-W-5HP-1 (5 HP Freewheel Winch)
WINCH
| Drum Capacity: |
500m (1640 ft) of 8mm (0.315") cable |
|
| Line Pull: |
Full Drum Bare Drum |
- 195 kg (430 lb) - 300 kg (660 lb) |
| Line Speed: |
Full Drum Bare Drum |
- 0.85 m/s (168 ft/min) - 0.55 m/s (109 ft/min) |
- 5 HP, 230 VAC-60-1P HPU
- Electric cable levelwind - automatically adapts for different cable sizes
- Remote joystick for winch control
- Seawater/oil oil cooler
- Aluminum construction
Model SPA-W-5HP-1-AL (5HP Freewheel Winch)
WINCH
| Drum Capacity: |
300m (984 ft) of 16mm (0.63") cable |
|
| Line Pull: |
Full Drum Bare Drum |
- 195 kg (430 lb) - 354 kg (780 lb) |
| Line Speed: |
Full Drum Bare Drum |
- 0.97 m/s (192 ft/min) - 0.53 m/s (106 ft/min) |
- 5 HP, 220 VAC-60-1P HPU
- Oil/water oil cooler
- Electric cable levelwind - automatically adapts for different cable sizes
- Freewheel capability
- Aluminum construction
Model SP-W-3HP-2 (3 HP Freewheel Winch w/Optional Line Puller)
WINCH
| Drum Capacity: |
1000m (3280 ft) of 5mm (0.22") cable |
|
| Line Pull: |
Full Drum Bare Drum |
- 64 kg (142 lb) - 91 kg (200 lb) |
| Line Speed: |
Full Drum Bare Drum |
- 1.14 m/s (224 ft/min) - 0.81 m/s (160 ft/min) |
- 3 HP, 220 VAC-60-1P HPU
- Electric oil heater
- Reversing ballscrew-type cable levelwind system
- Freewheel capability
- Aluminum construction
OPTIONAL EQUIPMENT:
| Line Puller Sheave - (only available on winches capable of freewheel mode) |
This is an overboarding sheave that is powered by a hydraulic motor. It helps pull cable off the winch drum, allowing for a true freefall of the instrument. When line puller mode is engaged, the winch automatically goes into freewheel mode. A remote pendant control for the line puller allows the operator to stand at the ship's side and watch the rate of freefall and adjust the speed according to the freefall rate. Cable out line speed - 1.45 m/s (285 ft/min) Line puller SWL - 91 kg (200 lbs) |
Larger versions of some models are available.
Inquire today.
ODIM Brooke Ocean's sister company, ODIM Spectrum Ltd., supplies their own line of cable fairing products and fairlead solutions. Their TufNose/TufStream and TufLine faired cable products can be seen here. Information on their unique fairlead mechanism, the space-saving cable guidance device fast becoming the standard on multi-streamer seismic vessels, can be seen here. |
Download this page as a PDF document (844k)NOTE: If you experience problems downloading the PDF, please right-click on the link and select "Save Target As...". The file will download normally and you can save it and select to open it or view it later.
Home · Slip Ring Winches · Contact Us · Top · www.rolls-royce.com · www.odim.com
Contents Copyright ©2009 ODIM Brooke Ocean
URL: http://www.brooke-ocean.com/winch_hyd.html (Last Updated: March 18, 2009)